Features
- Synchronizes to GPS
- Precise 1PPS Output (high drive output 10 Volts)
- 10 MPPS Rate Output
- USB I/O Interface with Locking Connector
- LED Status Indicators
- Wide Range DC Power (10 to 32 Vdc)
Product Description
The purpose of the Model PRG-101C-10 is to provide a 10 Volt 1PPS synchronization pulse that is used as a reference frequency for user equipment applications. In addition the unit outputs GPS time, position and status via a USB port that operates as a Virtual Communication Port (VCP).
The PRG-101C-10 outputs the following NMEA messages once per second: GGA, RMC or GSA.
General Product Specifications
Signal Outputs
- 1PPS Output
- Amplitude: 10 Volts
- Pulse Width: 20 microseconds, rising edge on-time
- Connector: SMA labeled 1PPS, 10 Volt
- 10 MPPS Output
- Amplitude: TTL levels
- Connector: SMA labeled 10MPPS
GPS Antenna
- GPS L1 signal and 3.3 Volt power to antenna
- Connector: SMA
- Magnetic Mount
- Weight: 50g
- Gain 26dB
- VSWR <2.0
- Voltage 3.3V +/- 0.5V
- Current 12mA
Oven Oscillator
- Frequency Stability vs Temp: 3X10-9 -40 to +85 C
- Warm-up Time: 10 minutes at 25C +/-5X10-9 of final frequency
- Frequency error: <1X10-9 when disciplined
- Aging per day: +/- 0.5X10-9
Power
- AC to DC converter module power input
- 10 to 32 Vdc, 5 Watts maximum at turn on
- Connector: 4-pin bayonet locking
USB Port
- USB 1.1 and USB 2.0 compatible
- Connector: USB-MicroB
- Outputs NMEA once per second: GGA, RMC or GSA
Environmental/Mechanical
- Case
- Size: 4.72” length X 4.07” width X 1.06” height
- Weight: < 1 pound
- Mounting: 4 #6 threaded mounting holes on bottom plate
- Operating Temperature: -30 to +85 degrees C
- Storage Temperature: -40 to +125 degrees C
- Humidity: To 95% non-condensing
- Certifications: RoHS
Options
- Optional Kit PRG-101C-10K
- Part number PRG-101C-10K is a kit containing the PRG-101C-10 bundled with 36-inch SMA-SMA cable, 36-inch power cord, and outdoor GPS antenna with 100-foot cable in place of magnetic mount antenna described above.
Product Views
