Model TS-101 portable rugged test set that measures an external time signal to UTC via a GPS Synchronized Receiver.
Features:
- Compares input time to reference
- Input can be PTP, IRIG-B or 1PPS
- Reference synchronized to GPS
- Reference can be IRIG-B or 1PPS
- Resolution to better than 1 usec
- Front panel measurement
- Graphical User Interface
- LCD display
- Rugged / Portable case
- Windows GUI for setup, control and time interval measurement display
Product Description
The Model TS-101 is a portable and rugged test set that measures an external time signal (PTP, IRIG-B or 1PPS) to UTC via a GPS Synchronized Receiver. Once synchronized to GPS the first measurement is instantaneous and can continue to be made whether or not the TS-101 is synchronized to GPS. Measurements can be made to a resolution of less than 1 microsecond.
The TS-101 can also be synchronized by an external IRIG-B or 1PPS to measure the relative synchronization between two external time sources.
Comprising a fully functional TimeTap Grandmaster (model TTGM-101) and TimeTap (model TT-101), this test set also functions as a Synchronized Time Code Generator with PTP Grandmaster and slave capabilities.
The TS-101 is powered through a provided AC Adapter, an external USB connection from a laptop or other similar source or an external battery.
General Product Specifications
General Specifications
- Timing Accuracy:
- < 1 microsecond to GPS, DCLS Time Code or 1PPS
- < 5 microseconds to AM Time Code reference
- Internal Oscillator: 50MHz Crystal Oscillator
- 50PPM, DDS steering
Environmental / Mechanical
- DC Power Level: 5 Vdc < 500 mA
- powered through the USB Bus or DB-15 multi-pin
- Physical Dimensions
- Size: 4.72” length X 4.07” width X 2.09” height
- Weight: 1 pound
- LCD Displays: Two of 2 line X 20 character – backlit
- Operating Temperature: 0 to 50 degrees C
- Storage Temperature: -40 to +80 degrees C
- Humidity: To 95% non-condensing
- Antenna
- Size: 1.81″ length X 1.81″ width X .50″ high
- Weight: < 1 pound
- Operating Temperature: -40 to +70 degrees C
- Storage Temperature: -40 to +85 degrees C
- Connector: SMA
- Cable Length: 5 meters (Longer lengths available)
Ships with x2 SMA to BNC converter cables
- Certifications: FCC, IEEE C37.90 and IEC 60255
Standard Inputs
- GPS Input: 1.575 GHz L1 C/A Code
- GPS Receiver: 12 parallel channels
- Internal Oscillator disciplined to GPS
- Antenna: L1 GPS with 5-meter SMA cable
- Connector: SMA labeled GPS ANT
- PTPv2 Default Profile
- Ethernet II, IPv4, UDP Multicast,
- Two-step PTPv2 packets
- Connector: RJ-45
- Limited PTPv2 compliance
- AM Serial Time Code Input
- Format: IRIG A, B, G; NASA36
- Amplitude: 1-6 Vpp into 50 ohms
- Connector: SMA labeled CODE IN
- DC Level Shift (DCLS) Serial Time Code Input
- Specification: IRIG A, B, G; NASA36
- Amplitude: TTL levels
- Connector: DB-15 multi-pin, pin 9
- 1PPS Reference Input
- Amplitude: TTL levels
- Connector: DB-15 multi-pin, pin 9
Standard Outputs
- PTPv2 Default Profile
- Ethernet II, IPv4, UDP Multicast
- Two-step PTPv2 packets
- Connector: RJ-45
- Limited PTPv2 compliance
- AM serial Time Code Output
- Format: IRIG A, B, G; NASA36
- Amplitude: 3 Vpp into 50 ohms
- Ratio: factory set to 3:1
- Connector: SMA labeled CODE OUT
- DC Level Shift (DCLS) Serial Time Code Output
- Format: IRIG A, B, G; NASA36
- Amplitude: 3.3V logic
- Connector: DB-15 multi-pin, pin 10
- 1PPS Output
- Logic Level: 3.3V logic into 50 ohms
- Timing: Positive edge on time
- Duty Cycle: 50%
- Connector: DB-15 multi-pin, pin 5
- 1PPS Output
- Logic Level: 3.3V logic into 50 ohms
- Timing: Positive edge on time
- Duty Cycle: 50%
- Connector: DB-15 multi-pin, pin 5
- USB Port
- Output Data: Time and Status
- FTDI Virtual COM Port
- Connector: Micro USB
- Supplies 5V unit power, Command Line Interface I/O
- Time once per second
Product Views
